Ezypor Fuel Additive Dispenser (28mm)
This is an essential accessory to our fuel additives. Its child-safe, drip-free design delivers every dose accurately, and the reusable dispenser works across multiple bottles. For clean, precise fuel treatment every time.
Details
FUEL ADDITIVE DISPENSER
The perfect device to help dispense PT5 Petrol/GT5 Gasoline Treatment from 500ml bottles and DT5 Diesel Treatment from 1 litre bottles.
The EZY-POR can be transferred from bottle to bottle, so it is a versatile and economical investment. It is fitted with a childproof ratchet in the bottle attachment and in the top cap to give you piece of mind.
INSTALLATION
Remove the tamper-evident transport cap from PT5/ GT5 or DT5 and install the EZY-POR dispenser into the bottle. The plastic inlet pipe will curve if it is longer than the depth of the bottle to extract the maximum product. Screw the ribbed section down until it ratchets. This will apply correct tension to the internal seal.
OPERATION
Press down on the top cap to engage the ratchet, and unscrew. The extension nozzle pops up and the bottle is squeezed gently to fill the EZY-POR to the correct level, in steps of 5ml, 10ml, 15ml and 20ml as per calibrations. Pour the contents into the fuel tank. A ball bearing falls forward when the bottle is tipped, to retain the remaining liquid. Replace the top cap, pressing down whilst rotating the cap to the fully sealed position.
REMOVAL
To change the EZY-POR to another bottle, press the lower ribbed section down to engage the ratchet, and unscrew.